Fluke 325 True RMS Clamp Meter

 

Fluke 325 True RMS Clamp Meter

Fluke 325 is a convenient device that comes with various options, including the AC and DC voltage and current, resistance, and frequency measurements. The device has the following specifications:

AC Current: 40A-400A

DC Current: 40A-400A

AC Voltage: 600V

DC Voltage: 600V

Resistance: up to 40k Ohms

Temperature: -10 to 400 degree Celsius

Frequency: 5-500Hz

Capacitance: 100-1000uF

AC Response: True RMS

Experiments:

Continuity Test: Plug the probes into the meter and rotate the knob to the buzzer symbol. Now connect the two probes, and a beep sound can be heard. This shows the device is in calibration.

Resistance Measurement: plug the probes into the conductor after turning the knob to the resistance symbol. The device measures the resistance and displays reading on display. The reading is adjusted automatically, and depending on the range, a symbol “k” appears on display to represent the kilo-ohm readings.

Voltage Measurement: To measure the voltage turn the knob to the voltage symbol and connect the probes to the conductor. The meter sets the range, and the display shows the reading.
Current Measurement: The current can be measured using the clamp, pass the single conductor through the clamp, and set the knob to the current position. The meter used the electromagnetic induction procedure to determine the current, auto sets the range, and displays the reading onto the display.